Resources For Specifiers

Arcus Spec Sheets, 2D DWG Files and 3D Revit Files

Below you will find resource links for the Arcus range of WA Built Commercial Water Coolers.

With each product, there are four files available to you.

  1. Specification Sheet (Specs) – a detail spec sheet.
  2. DWG file (DWG) – plan and elevation drawings.
  3. Revit (Revit) – a Revit family 3D drawing with service connection points.
  4. Render (Render) – a 3D rendered Revit family file ideal for creating 3D presentations.

 

STW44 Series Water Cooler

This West Australian made water cooler features a large storage capacity that caters for the big instant demand created by heavy use at times such as recess and lunch breaks. Ideal for primary or junior schools, the STW44 sits only 770mm high and is designed to provide 44 litres of 10oC water per hour in rated conditions.

Specs  DWG  |  Revit  |  Render

 

STW78 Series Water Cooler

This West Australian made water cooler features a large storage capacity that caters for the big instant demand created by heavy use at times such as recess and lunch breaks. Ideal for secondary schools, universities and factories etc, the STW78 is designed to provide 78 litres of 10oC water per hour in rated conditions.

Specs  |  DWG  |  RevitRender

 

STW18 Series Water Cooler

This West Australian made water cooler is ideal for smaller venues such as offices and small factories. It is designed to provide 18 litres of 10oC water per hour in rated conditions. The STW18 models have small internal storage but fast recovery rates so are ideal for all day use.

Specs  |  DWG Revit  |  Render

 

STW34 Series Water Cooler

This West Australian made water cooler is ideal for mid size venues such as offices and factories. It is designed to provide 34 litres of 10oC water per hour in rated conditions. The STW34 models have small internal storage but fast recovery rates so are ideal for all day use.

Specs DWG Revit  |  Render

 

STW54 Series Water Cooler

This West Australian made water cooler is ideal for larger venues such as big offices and factories. It is designed to provide 54 litres of 10oC water per hour in rated conditions. The STW54 models have small internal storage but fast recovery rates so are ideal for all day use.

Specs  |  DWG Revit  |  Render

 

WM18 Series Water Cooler

This West Australian made water cooler is ideal for smaller venues such as offices and small factories. It is designed to be hung on the wall and provide 18 litres of 10oC water per hour in rated conditions. The WM18 models have small internal storage but fast recovery rates so are ideal for all day use.

Specs  |  DWG Revit  |  Render

 

WMFS18 Series Water Cooler

This West Australian made floor standing water cooler is ideal for pre-primary schools and any venue designed for young children. It is designed to provide 18 litres of 10oC water per hour in rated conditions. The WMFS18 models have small internal storage but fast recovery rates so are ideal for all day use.

Specs  |  DWG Revit  |  Render

 

HT4D Water Cooler

This West Australian made water cooler is designed to allow multiple users access to cold water at one time. Furthermore, the HT4D includes a section that allows a wheelchair user to get access to a bubbler that features a touch activated dispense button. The HT4D incorporates the Arcus US62 that will provide 62 litres of 10oC water per hour in rated conditions1 and comes fully plumbed ready for install.

Specs DWG Revit 

 

RWC24BJ Series Water Cooler

This West Australian made water cooler is designed to be recessed into an alcove so as not to protrude into a corridor or room. The RWC24BJ includes the Arcus R24 Water Cooler that will provide 24 litres of 10oC water per hour in rated conditions.

Specs  |  DWG Revit

 

R24 Water Cooler

This West Australian made water cooler was designed specifically to go into a cupboard or other small but ventilated space as well as our RWC24 recessed water cooler. It will deliver 24 litres of 10oC water per hour at rated conditions. The R24 is the perfect compact remote cold water source and is ideal for feeding drinking stations, feeding and improving the production of ice machines and other outlets that require cold water.

Specs  |  DWG  |  Revit

 

US62 Underslung Water Cooler

This West Australian made water cooler was designed to be located below our HT series trough or to be used as a remote water source for other items such as ice machines (increases production), bakery equipment and more. It will deliver 62 litres of 10oC water per hour at rated conditions.

Specs  |  DWG  |  Revit

 

HT Series Drinking Troughs

Ideal for education facilities and other venues where multiple users need access to drinking water. This West Australian made trough comes in three convenient sizes and in left or right hand drain models. Pair a HT trough with a US62 water cooler and it will provide 62 litres of 10oC water per hour in rated conditions.

Specs DWG  Revit 

 

STW660 Large Volume Water Cooler

This West Australian made water cooler was designed to produce a serious amount of cold water and is nearly always found in the north west providing cold water to the workers on mine sites. It is designed to provide 660 litres of 10oC water per hour in rated conditions.

Specs DWG  |  Revit